Steinheil GLAS.tR SLIM is made to protect the LCD from damage and scratches with specially processed transparent glass that has been reinforced to increase shock absorbency. The GLAS.tR SLIM has all the great properties of the GLAS.t SLIM, but it's been improved to ensure even longer lasting durability. The R in GLAS.tR stands for the rounded edges of the screen protector. Being made of glass, the edges of the screen protector are the most vulnerable to chipping. The rounded edges help to deflect shock from bumps and drops. The glass has been designed to be 28% slimmer and still maintain its high level of surface hardness of 8~9H. When installed, there are no gaps between the LCD and the GLAS.tR SLIM which means the touch screen's sensitivity is unaffected. To prevent any excess force from coming in contact with the edges of the screen protector we highly recommend that a case is used with the GLAS.tR SLIM.
|What's in the package||
- GLAS.tR SLIM Premium Tempered Glass Screen Protector
*When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to reuse the GLAS.tR SLIM once it's been applied. *Using excessive force when installing or removing the screen protector may damage the product.
Q. Does the GLAS.tR Slim work for other Samsung Galaxy devices?
A. No, we are sorry but our Galaxy Note 3 GLAS.t will only be compatible with Galaxy Note 3 devices.
Q. How do I install the GLAS.tR Slim?
A. Use the provided alcohol swab to clean your device and make sure that the surface is completely dry and clean afterwards. The tab labeled "Back" is the protective film that covers the adhesive (sticky) side of the screen protector. The tab labeled "Front" is the protective film that covers the front of the GLAS.t. Remove the Back tab and apply the screen protector to the device screen aligning with the cutouts. Squeegee any bubbles and then remove the Front tab when finished. The GLAS.t is a one-shot install. This means that once the screen protector is applied completely to the device, it cannot be removed and reapplied. Make sure the GLAS.t is centered before laying down the GLAS.t. The GLAS.tR Slim is 0.4 mm thick and will recess the home button. For easy access to the home button, please apply the home button stickers provided with your GLAS.t package.
Q. What happens if I mess up on the installation or something goes wrong with my GLAS.tR Slim?
A. You do not have to worry! Your GLAS.t is protected by our GLAS.t Low-Cost Replacement Program. Simply return the GLAS.t product back to us with the replacement form filled out completely. You can find the form here: www.spigen.com/need1more
Q. How do I remove the GLAS.tR Slim?
A. The GLAS.t can be removed by using a hard card like an ID or credit card. Lift the GLAS.t with the card from any corner of the screen protector. Once the corner has been lifted off the device, hold the corner and remove slowly. If the GLAS.t cracks, it will not shatter. The GLAS.t will not damage or leave residue on your device screen.
Q. Is there anything I should take caution of when using the GLAS.t?
A. The GLAS.t is a product made of glass. While it is tempered to shatter within the film when dropped, there are some things that you need to be aware of when using the GLAS.t. As with most glass products, the edges of the GLAS.t are the most vulnerable areas on the screen protector. This means the edges are the most likely to chip or crack when pressure or force is applied to it. If you see that the edges have chipped or have cracks, please remove the GLAS.t from your device as this can be potentially harmful. Please take care that your device is not accessible to children if your GLAS.t begins to crack. We highly recommend that you use a case along with your GLAS.t screen protector to avoid chipping along the edges. Also we would recommend using a case to protect the edges against any unwanted lifting.